Automatic paver production line (CurbStone, block and paving stone) TP.RN2530 is produced by Aradsan Machine. This system can produce different types of concrete parts such as Pavers, Curbstone, Hollow Block, Canivo and flower box. It is possible just by changing the mould. The production line of TP.RN2530 automatic from the basic to advance phase (weighing material, mixing materials, production, curing system and packing) is done by machine and without human interposition.
The products of Aradsan Machine with preservation of the quality and quantity of concrete production components and increasing the field of operation have succeeded in facing the needs of the community in the field of the competition with domestic and foreign competitors.
Complete Production Stages of the TP.RN2530 Automatic Block-Making Machine
- Stage 1: Material Preparation
Raw materials such as sand, gravel, cement, and water are weighed using a batching system and mixed in a mixer. The prepared mixture is then transferred via conveyor belt or feeder to the production section.
- Stage 2: Block Production
The mixed material is poured into the machine’s hopper, from where it is automatically fed into the mold by a loader. The machine compresses the material to form concrete blocks, which are placed on pallets.
- Stage 3: Packaging and Storage
At the end of the chain conveyor, pallets are stacked using an elevator system. A finger car transfers the stacked pallets to a steam curing chamber. After 8 to 10 hours of curing, the dried blocks are sent to the packaging section. The packaging robot wraps and stacks the products, which are then moved to storage. Empty pallets are cleaned and returned to the production cycle via the chain conveyor and pallet return system.
The Specification Of Parts Used in Fully Automatic Pavement Making Machine TP.RN2530:
- Piston Jack Pipes: Special pipes for stone crushing, BOSCH or BOHLER from Germany, or CE-certified European pipes.
- Hydraulic Hoses: German or Italian Type
- Control Electric Valves: Duplomatic from Italy.
- Jack Shafts: Special chrome-hardened steel from Italy.
- Control Electrical Panel: Siemens components from Germany (thermal switches and contactors), relays from Muller in Germany.
- Generators: Siemens and VEM from Germany, CE-certified European generators.
- Adjustable Electric Motors: CE-certified European motors.
- Sheets inside the Mixer System and Paroi: Dillidor sheets from Germany or Hardox from Sweden (20–10 mm).
- System Molds: Three different types of sheets with special alloys and high wear resistance.
- Vibrator Table System: Asymmetric and Dual
- Used Paint: Automotive-specific paint.
- Machine Chassis: Heavy-duty industrial steel, 10–12 mm thick, highly resistant to impact and pressure (safety factor 2.5).
- Touch screen monitor: Siemens Germany, capable of automation control through microswitches and sensors.
| Type of production parts | Production dimensions | Production capacity |
| paving stone | 200x100x60 mm | 1400 m2 |
| curbstone | 500x500x150 mm | 6000 Pcs |
| curbstone | 500x350x150 mm | 7500 Pcs |
| Concrete block | 400x200x200 mm | 18000 Pcs |
| Concrete block | 400x200x150 mm | 21000 Pcs |
| flowerbox | 450x250x200 mm | 8000 Pcs |
 TP.RN2530){kind=link}
Reviews
There are no reviews yet.